Cisco RV130W-E-G5-K9

Thông số kỹ thuật

Specifications

Description

Standards

IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree) 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)

Ports

LAN, WAN, USB

Switch

Power button (on/off)

Buttons

Reset

Cabling Type

Category 5e or better

LEDs

Power, VPN, USB, WAN, Wireless, LAN (ports 1-4)

Operating System

Linux

Network

Network Protocols

LAN

WAN

WLAN

Routing Protocols

Network Address Translation (NAT)

Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol

VLAN Support

Port-based and 802.1Q tag-based VLANs

Number of VLANs

5 active VLANs (3-4096 range)

IPv6

Network Edge (DMZ)

Software configurable to any LAN IP address

Layer 2

802.1Q-based VLANs, 5 active VLANs

Security

Firewall

Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ

DoS Attacks Prevented:

Block Java, Cookies, Active-X, HTTP Proxy

Access Control

IP access control lists; MAC-based wireless access control

Content Filtering

Static URL blocking or keyword blocking

Secure Management

HTTPS, username/password complexity

WPS

Wi-Fi Protected Setup

User Privileges

2 levels of access: admin and guest

VPN

Gateway-to-gateway IPsec VPN

10 gateway-to-gateway IPSec tunnels

Client-to-gateway IPsec VPN

10 client-to-gateway IPsec tunnels using TheGreenBow and ShrewSoft VPN client

PPTP VPN

10 PPTP tunnels for remote client access

Encryption

Triple Data Encryption Standard (3DES)

Authentication

MD5/SHA1

VPN Pass-through

IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through

Quality of Service

QoS

Jumbo Frame

Supports Jumbo Frame on Gigabit ports - at least 1536B

Performance

NAT Throughput

800 Mbps

Concurrent Sessions

12,000

IPsec VPN Throughput
(3DES/AES)

50 Mbps

Configuration

Web User Interface

Simple, browser-based configuration (HTTP/HTTPS)

Management

Management Protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour, Universal Plug and Play (UPnP)

Event Logging

Local, syslog, email alerts

Network Diagnostics

Ping, Traceroute, and DNS Lookup

Upgradability

Firmware upgradable through web browser, imported/exported configuration file

System Time

Supports NTP, Day Light Savings, Manual entry

Languages

GUI supports English, French, Italian, German, and Spanish

Wireless

Radio and modulation type

802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM

WLAN

2.4GHz IEEE 802.11n standard-based access point with 802.11b/g compatibility

Operating channels

11 North America, 13 most of Europe, auto channels selection

Wireless isolation

Wireless isolation between clients

External antennas

2 fixed antennas

Antenna gain in dBi

2 dBi

Transmit power

802.11b: 16.5 dBm +/- 1.5 dBm; 802.11g: 15 dBm +/- 1.5 dBm; 802.11n: 12.5 dBm +/- 1.5 dBm

Receiver sensitivity

-87 dBm at 11 Mbps, -71 dBm at 54 Mbps, -68 dBm at mcs15, HT20, -66 dBm at mcs15, HT40

Radio Frequency

Single-band, works on 2.4GHz

Wireless Domain Service (WDS)

Allows wireless signals to be repeated by up to 4 compatible devices

Operating Modes

Multifunction device-wireless router, access point mode with WDS, Point-to-Point Bridge mode with WDS, Point-Multi Point Bridge mode with WDS, Repeater mode with WDS

Active WLAN clients

Support up to 64 concurrent clients in wireless router mode and wireless Access Point mode

Multiple SSIDs

Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks

Wireless VLAN map

Supports SSID to VLAN mapping with wireless client isolation

WLAN security

Wired Equivalent Privacy (WEP), WPA, WPA2-PSK, WPA2-ENT, 802.11i

Wi-Fi Multimedia (WMM)

WMM, WMM power save (WMM-PS)